Mitsubishi GOT2000 Series User Manual

16.1 Device Monitor Function
16 - 7
GOT SELF CHECK (DEBUG)
16
16.1.7 Device registration
The following explains the procedures for device registration.
For the keyboard operations, refer to the next page.
No. Item Settings
1) Data type
32: Indicates that the device value is a 32-bit (two-word) module.
Nothing displayed: Indicates that the device value is a 16-bit (one-word) module.
2) Device name
Set the device name and device number to be monitored.
3) Device No.
When the GOT is connected with a Q series
CPU in the multiple CPU system or QnUCPU
1)
When the GOT is connected
with a CPU other than a Q series
CPU in the multiple CPU system
and QnUCPU
When multiple devices need to be
registered, repeat the procedures.
Enter the CPU No. with the
ten-key, and touch the
ENT key.
Touch the key.
DEV
Set 1) to 3) using the keyboard,
and touch the
ENT key.
The device registration
is completed.
Keyboard
Specify the CPU No. of the device
to be registered when connecting
the GOT to a Q series CPU in the
multiple CPU system or QnUCPU.
Device monitor
Touch
Touch
Keyboard
2) 3)

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English