Mitsubishi GOT2000 Series User Manual

7 - 1
7
INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION
7. INSTALLATION OF BOOTOS AND BASIC SYSTEM APPLICATION
To execute the GOT utility, install the BootOS and system applications on the C drive (built-in flash memory) of the GOT, or
set the boot drive of the system application to [A: Built-in SD card] and insert an SD card with system applications into the
GOT.
(BootOS is installed in the GOT at factory shipment. It is not necessary to install BootOS when upgrading of it is
unnecessary.)
This chapter explains the installation using GOT.
*1 *1 When execute installation with a USB memory, the system applications have to be installed in GOT in advance.
Refer to the following for the installation which uses GT Designer3.
➠ GT Designer3 (GOT2000) Help
When GOT is remote,
installed easily using
a data storage
The GOT can starts without a
system application installed.
Install the SD
card in GOT
Install the SD
card in GOT
Set the OS boot drive to
[A:標準SDカード].
Install a data storage
in the GOT.
Data storage
Install from GOT to GOT
using a data storage.
SD card
BootOS or system
application installation
BootOS or system
application installation
Data storage
GOT
*1
*1
GT Designer3 → Data storage → GOT
GOT → Data storage → GOT
Write
system
application
Write
system
application
System
application
upload
GT Designer3
GOT
GOT
GOT

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English