Mitsubishi GOT2000 Series User Manual

2.14 Operator Authentication
2 - 73
2
GOT BASIC SETTING
(3) Function setting operation
Step 1.
Touch [Function setting] in the operator setting menu, and
then the Admin password authentication dialog is
displayed.
Step 2. Input the administrator password.
Character types to be input can be changed with touching
the following buttons.
[A-Z]: Alphabet capital
[a-z]: Alphabet small letter
[0-9]: Numeric
When the input is completed, touch the [Enter] key.
Step 3. When the administrator password is correctly input, the
Function setting screen in displayed.
Touch an item to be set.
(a) Automatic logout time
(b) Auth method
(c) Password expiration date
(d) Initial position input
(e) Valid byte count input
(f) Continuous failure count to block login
(g) Login prohibition time
(h) Continuous failure count to lock an operator ID
(a) Automatic logout time
Touch [Automatic logout time], and then the Automatic
logout time edit dialog is displayed. Input the time.
When the input is completed, touch the [Enter] key.
(b) Authentication method
Switch the authentication method.
Every time the item is touched, the display switches in the
following order: [Operator name + password] → [External
auth (general)] → [Operator name + password]. When
[External auth (general)] is selected, the check box for
[Operator name + password] appears.
Selecting the check box also enables login by [Operator
name + password] at login by [External auth (general)].
(Continued to next page)

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English