Mitsubishi GOT2000 Series User Manual

15.8 Backup and Restoration
15 - 49
CONTROL OF VARIOUS DATA (DATA CONTROL)
15
■1. Setting the password for the backup/restoration
The password for the backup/restoration can be set only when the following conditions are satisfied at the first backup.
• A password has been set to the backup target file of the controller.
The authentication using the password on the controller side is required at the first backup.
The following shows the operation procedure at the first backup.
For details of the operation screen, refer to the following.
➠ 15.8.6 Display operation of backup and restoration
No
No
Start
Touch [Backup] in main menu.
(First backup)
Is there any password set
for the file to be backed up?
Input the password on the controller side.
(For the second file or later, the automatic
authentication is conducted using the last input
password. Only when the automatic authentication
has failed, inputting the password is required.)
Is the password correct?
File is backed up.
Is there any other file?
Is there any other units?
(When a multiple CPU system is used)
Set the password for the backup/restoration
using 32 characters or less
(alphanumeric characters and symbols only).
Backup is completed.
Yes
Yes
No
No
Yes
Yes
For other than FXCPU
For FXCPU
If a keyword has been set, clear it.
Is there any other controller
that is to be backed up?
(When a controller list file exists)
No
Yes
15.8.6 Display operation of backup and
restoration

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English