►
Turn Knob 5–7 under the right display to select tags at the three levels of the tag filter.
Turn a Knob at full left to remove any particular selection at this level (i.e. to select all
items at this level).
Selecting Type and Mode tags on your controller (here for Instrument presets).
▪ When browsing Projects, Groups, Sounds or Samples, Knob 5–7 allow you to select Type
tags in the three hierarchical levels.
▪ When browsing Instrument or Effect presets (as in the picture above), Knob 5 and 6 allow
you to select a Type and a Sub-Type, respectively; Knob 7 allows you to select a Mode.
3.2.7 Performing a Text Search
In the Search field you can enter your search query.
The Search field.
►
Click in the Search field and type the desired text to limit the results to files containing
this text.
The search will be performed on the file paths, the file names, the products/banks/sub-banks,
the tags, and the properties directly as you type. If you want to search for a combination of two
words (e.g. “bass” and “analog”) just enter both words in the Search field with a space in be-
tween. As you start typing, the list of matches will start narrowing in the Result list below.
On the right of the Search field, click the Reset button (showing a little cross) to reset both text
search and tag search. The Product selection is not affected.
Browser
Searching and Loading Files from the Library
MASCHINE STUDIO - Manual - 146
To Next Page
Loading...
Need help?
General
