Native Instruments MASCHINE STUDIO User Manual

►
Click and drag the Loop range left or right.
→
The whole Loop range is moved.
Activating or Deactivating a Loop in the Software
To activate a Loop using the software:
►
Click the Loop button in the header to activate or deactivate the loop.
When the Loop is activated the Sections within the Loop range are repeated.
13.3.14.2 Setting the Loop Range Using the Controller
Set the start, end and position of the loop using the dedicated Loop page.
To set the loop range using MASCHINE STUDIO:
1. Press and hold SHIFT + RESTART (LOOP) to access the Loop screen.
2. Press Button 5 LOOP to activate the loop.
3. Turn Knob 3 START to set the start point of the loop.
4. Turn Knob 4 LENGTH to set the length of the loop.
→
The start and end points of the loop range are set.
►
Turn Knob 1 POSITION to alter the position of the whole loop.
→
The position of the loop range is adjusted.
►
Press Button 4 ALL to loop the whole song.
→
The start and end points of the loop range are set to the range of the whole song.
Working with the Arranger
Using Arranger View
MASCHINE STUDIO - Manual - 797

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English