Sound slots 1 to 4 are selected. If they have different Key values, a MULTI label appears (left). When you drag it (middle), a
transpose value appears (right) that will be applied to all selected Sounds when you will release the mouse button.
This is also true when adjusting the parameter from your controller.
Adjusting the Choke or Link Parameter for Multiple Sounds with different Choke or Link Values
â–º
Click the MULTI label next to Choke or Link and select the desired value from the list to
set all selected Sounds to that same Choke or Link group, respectively. This also applies
to the Master/Slave setting next to it.
Sound slots 1 to 4 are selected. If they have different Choke values, a MULTI label appears (left). When you click it and
select a new Choke or Link group from the list (middle), this new group is applied to all selected Sounds.
Playing on Your Controller
Adjusting the Key, Choke, and Link Parameters for Multiple Sounds
MASCHINE STUDIO - Manual - 251
To Next Page
Loading...
Need help?
General
