1. Click the headphone icon in the strip’s header to show the controls for the Cue channel.
2. To adjust the level and panoramic position of the Cue output, use the channel’s fader and
balance control (above the fader), respectively.
This is equivalent to setting the Level or Pan parameters in the CUE section, respectively
(see above).
3. To select another destination for the Cue output, click the first area under the level meter
and select the desired destination in the menu.
This is equivalent to setting the Output parameter in the MAIN section (see above).
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE STUDIO - Manual - 467
To Next Page
Loading...
Need help?
General
