Native Instruments MASCHINE STUDIO User Manual

Following sections describe the various MASCHINE contexts in which touch sensitivity comes
into play.
You can adjust the touch sensitivity of Knobs 1–8 — see section ↑2.6.8.5, Adjusting
the Knobs’s Touch Sensitivity for more on this.
Important: Update the Controller Firmware to the Latest Version!
The touch-sensitive features will work on your MASCHINE STUDIO controller only if its firm-
ware is in version 22 or greater.
If the MASCHINE software is running and the connected MASCHINE STUDIO controller has a
firmware version lower than 22, the touch-sensitive features will not be enabled. Furthermore,
in the Hardware page of the Preferences panel, the new Touch-Sensitive Knobs section won’t
provide any settings but instead show a message indicating how to update the firmware of your
controller:
The message in the Hardware page of the Preferences panel helps you update your controller’s firmware.
To update the firmware of your MASCHINE STUDIO controller, do the following:
1. Connect your MASCHINE STUDIO controller to your computer and switch it on.
2. Open your favorite internet browser and open the following page of the Native Instruments
website:
http://www.native-instruments.com/en/support/downloads/
3. Click the “Drivers and other files” link and, in the “Maschine Controller” section, click
the Device Updater for your operating system to download it.
4. Once the archive has been downloaded, extract it to the desired folder.
5. In the Explorer (Windows) or Finder (Mac OS X), navigate to the extracted folder and open
it.
Basic Concepts
Preferences
MASCHINE STUDIO - Manual - 97

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English