2
Spin10KCE
Spin11KCE
Table of contents: page
1 Warnings 3
2 Product description 3
2.1 Operating limits 4
2.2 Typical system 5
2.3 List of cables 5
3 Installation 6
3.1 Preliminary checks 6
3.2 Fitting SPIN 6
3.2.1 Assembly of guide supplied with SPIN10KCE 7
3.2.2 SNA11 guide assembling 8
3.2.3 Mounting the gearmotor to the guide 8
3.2.4 Mounting the gearmotor to the ceiling 8
3.3 Installation of the Various Devices 9
3.4 Electrical connections 10
3.5 Description of the electrical connections 11
4 Final checks and start up 11
4.1 Power Supply Connection 11
4.2 Recognition of the door opening and
closing positions 12
4.3 Checking door movements 12
4.4 Pre-set functions 12
4.5 Radio receiver 12
4.5.1 Memorization of Radio Transmitters 13
4.5.2 Memorization Mode I 13
4.5.3 Memorization Mode II 13
4.5.4 “Remote” memorization 14
4.5.5 Deleting the Radio Transmitters 14
5 Testing and commissioning 14
5.1 Testing 14
5.2 Commissioning 15
6 Maintenance and Disposal 15
6.1 Maintenance 15
6.2 Disposal 15
7 Additional information 16
7.1 Programming keys 16
7.2 Programming 16
7.2.1 Level one functions (ON-OFF functions) 16
7.2.2 Level one programming (ON-OFF functions) 17
7.2.3 Level two functions (adjustable parameters) 18
7.2.4
Level two programming (adjustable parameters)
18
7.2.5 Level one programming examples
(ON-OFF functions) 19
7.2.6 Examples of Level 2 programming 20
7.3 Adding or Removing Devices 21
7.3.1 STOP Input 21
7.3.2 Photocells 22
7.3.3 Electric block 22
7.4 Special functions 23
7.4.1 “Always open” Function 23
7.4.2 “Move anyway” Function 23
7.5 Connection of other devices 23
7.6 Troubleshooting 23
7.7 Diagnostics and Signals 24
7.7.1 Signalling with flashing light and courtesy light 24
7.7.2 Signals on the control unit 24
7.8 Accessories 25
8 Technical characteristics 26
Instructions and Warnings for users of SPIN gearmotor 29
To Next Page
Loading...
Need help?
General
