Nice Spin10KCE Instructions And Warnings For The Fitter

25
GB
L1 LED Description
• Function programming in progress.
• If it flashes together with L2 it means that the user must carry out the recognition of the door opening and
closing positions (refer to Paragraph “4.2 Recognition of the door opening and closing positions”).
L3 LED Description
L2 LED Description
Off
Table 24: LED’s on the control unit’s keys
Correct during normal functioning.
Indicates that a radio code that is not in the memory, has been received during normal functioning.
• Function programming in progress.
• Memorising or Deleting the Radio Transmitters
On
It flashes
Off Indicates the slow “Motor speed” during normal functioning.
Indicates the fast “Motor speed” during normal functioning.
• Function programming in progress.
• If it flashes together with L3 it means that the user must carry out the recognition of the door opening and
closing positions (refer to Paragraph “4.2 Recognition of the door opening and closing positions”).
On
It flashes
Off During normal operation the device indicates “Automatic Closing” is inactive.
During normal operation the device indicates “Automatic Closing” is active.On
It flashes
7.8) Accessories
The following optional accessories are available for SPIN. For infor-
mation on the complete range of accessories, refer to the Nice s.p.a.
product catalogue.
For all versions
• SPA2 Mechanical release with metal cord. For use in systems
which envisage only the automated door as point of access.
For all versions
• SPA5 Oscillating arm. Required if the door to be automated is an
overhead type with springs or counterweights.

Nice Spin10KCE Specifications

General

Brand	Nice
Model	Spin10KCE
Category	Garage Door Opener
Language	English