To Next Page

To Previous Page

- 162 -

5. Fax

Setting for Receptions

This section describes various settings when receiving a fax.

• Setting the Reception Mode (User's Manual)

• DRD (User's Manual)

• Setting a Tray to Print Received Documents

• Setting the Waiting Time from When an Incoming Call Arrives to When Reception Starts

(Response Waiting Time) (User's Manual)

• Setting a Print Method for When a Received Image Exceeds Paper Size

• Duplex Printing

• Setting So That You Can Hear Line Monitor Sound

• Forwarding a Fax to Another Fax Number

• Setting When to Ring the External Telephone (Tel Priority Mode)

• Setting Fax Detection Mode

• Setting the T/F Timer

• Setting TAD Mode

• Block Junk Fax

Set the paper feeding tray to be used when printing received faxes.

• Do not pull the paper tray out during printing. It may cause running out of paper or paper jams.

• The machine can receive data of up to 8192 sheets. (However, this amount varies depending on the remaining

memory space or document content.)

• If the machine cannot print received faxes due to a lack of paper or paper jams, the machine starts printing when the

problem is solved.

Press the (SETTING) button on the operator panel.

Press the button to select [Paper Setup] and press the button.

Press the button to select [Select Tray] and press the button.

Check that [Fax] is selected, and then press the button.

Press the or button to select the tray to use for fax operation, and press

the button.

Press the or button to select [ON] and press the (OK) button.

Press the button until the home screen is displayed.

• Use only plain or recycled paper.

• Available paper sizes are A4, A5, B5, Letter, Legal 13, Legal 13.5, Legal 14, Statement, Folio.

Paper Size Priority

• If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets

Oki MC563 Advanced Manual

Other manuals for Oki MC563