- 373 -
11. Utility Software
• Starting the Registered sXP Application
You can start the registered sXP application.
The registered sXP application is saved in Job Macro. Refer to "Using a
Registered Macro".
• Editing the Name and URL of sXP Application
The name and URL of sXP application can be edited from the Web page of this
machine.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Click [sXP Application].
4
Click the application name you want to edit.
5
Edit "Application Name" and "URL Address" and click [OK].
• Deleting the Registered sXP Application
The sXP application can be deleted on the Web page of this machine.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Click [sXP Application].
4
Select the check box for the application name you want to delete.
5
Click [Delete].
6
Click [OK].
• View Information
About Items That Can be Set or Checked
Item Description
Status Displays the current status of the machine. All the
warnings and errors that have occurred on the machine
are displayed as "Alert information". You can also check
the operating status of each network service, a list of
machine information, and the IP address that is set to the
machine.
Counter Displays the number of printouts by printing or scanning.
Supplies Life Displays the remaining amount and lifetime of
consumables.
Usage Report Displays the print statistics results.
To Next Page
Loading...
Need help?
General
