- 41 -
2. Copy
6
Press the (MONO) or (COLOR) button.
This function enables you to copy both sides of an ID card, such as a driver's license, on one
side of a sheet of paper.
• You cannot use the ADF for this ID Card Copy function.
• Set the ID card with the upper side facing leftward.
• 2 mm from the edge of the document glass is the scan margin.
• The machine scans an area half the size of the specified paper. If the document is more than half the size of the paper
size, the excess part is discarded.
1
Press the (COPY) button on the operator panel.
2
Press the button.
3
Press the or button to select [ID Card Copy] and press the button.
4
Press the or button to select [ON] and press the (OK) button.
5
Press the button to go back to the standby screen.
6
Set your card with the front side down on the document glass.
7
Enter the number of copies.
8
Press the (MONO) or (COLOR) button.
9
When the [Please set back side of document.] screen is displayed, place your
card with the back side down on the document glass.
If you press [Scan Complete], only the front side is copied without scanning the back side.
Copying Both Sides of a Card to One Side (ID Card Copy)
To Next Page
Loading...
Need help?
General
