Oki MC563 Advanced Manual

- 359 -
11. Utility Software
Before setting WPA/WAP2-EAP as the security of wireless LAN, make a setting from the
[IEEE802.1X] menu.
Setting by Using EAP-TLS
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Click [Admin Setup].
4
Select [Network] > [IEEE802.1X].
5
Select [Disable] for [IEEE802.1X].
6
Select [EAP-TLS] for [EAP Type].
7
Enter a user name in [EAP User].
8
Select [Do not use SSL/TLS Certificate for EAP authentication], and then click
[Import].
If [Use SSL/TLS Certificate for EAP authentication] is selected, set the certificate in the [SSL/TLS] menu
beforehand.
9
Select the certificate file.
You can only import a PKCS#12 file.
10
Enter the password of the certificate, and then click [OK].
11
Select [Authenticate Server], and then click [Import].
If you select [Not authenticate Server], go to step 13.
12
Select the CA certificate file, and then click [OK].
Specify the certificate of the certificate authority (CA) to be used when authenticating RADIUS server. You can
import a PEM, DER, and PKCS#7 file.
13
Click [Submit].
14
Go to "Setting Wireless LAN (WPA/WPA2-EAP)" when the machine becomes
online.
Setting by Using PEAP
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Click [Admin Setup].
4
Select [Network] > [IEEE802.1X].
5
Select [Disable] for [IEEE802.1X].
6
Select [PEAP] for [EAP Type].
7
Enter a user name in [EAP User].
8
Enter a password in [EAP Password].
9
Select [Authenticate Server], and then click [Import].
If you select [Not authenticate Server], go to step 11.
10
Select the CA certificate file, and then click [OK].
Specify the certificate of the certificate authority (CA) to be used when authenticating RADIUS server. You can
import a PEM, DER, and PKCS#7 file.
11
Click [Submit].
Setting IEEE802.1X (Wireless LAN)

Oki MC563 Specifications

General

Brand	Oki
Model	MC563
Category	All in One Printer
Language	English