- 403 -
11. Utility Software
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select [Storage Manager] from the [Plug-ins] menu.
3
Click the device name in the device selection area at the bottom of the Storage
Manager plug-in screen.
The storage, volume name, size, free space, location name, label, status, file name,
size, and comment are displayed by communicating with the device.
You can restrict access to this machine by using a user name and password.
• Creating a New User
• Changing User Settings
• Deleting a User
If you click (Save to device), the changed settings are reflected to this machine.
Creating a New User
1
Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Select the [User Setting] tab.
4
Click [Role Manager].
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Click [User name/Group management].
7
Click (New(User)).
8
Enter the user name and password.
Set other information if necessary.
Display name: Enter a display name.
E-mail address: Enter the mail address of the user.
Language Code: Enter the language code.
PIN: Enter the PIN.
Card ID: Enter the user's IC card information.
Role: Set the role.
Group: Set the group the user belongs to.
Checking the Free Space in Memory/Hard Disk Drive Registering a User Name and Password
To Next Page
Loading...
Need help?
General
