Oki MC563 Advanced Manual

- 394 -
11. Utility Software
3
Select the [Device Setting] tab.
4
Click [Change password].
5
Enter the current password and a new password, and then click [OK].
You can register and edit the destination computers of Scan To Computer registered on this
machine as network scan information. This section describes how to export and import
network scan information to or from a file.
• Exporting Network Scan Settings to a File
• Importing Network Scan Settings from a File
• Deleting Network Scan Settings
Exporting Network Scan Settings to a File
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine that has the network scan settings you want to export from
[Registered Device Table].
3
Select the [User Setting] tab.
4
Click [Network Scan Manager].
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Click (Export to file).
7
Enter the name of a file, select a save destination folder, and then click [Save].
After exporting, the edited CSV file may not restore properly.
Importing Network Scan Settings from a File
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
Setting a Network Scan

Oki MC563 Specifications

General

Brand	Oki
Model	MC563
Category	All in One Printer
Language	English