- 283 -
9. Operating Management/ Specifications
Secure Protocol Server Setting
To apply the settings that are changed on the [Network Menu] menu, you must restart a network card. Restart the
network card according to a confirmation screen that is displayed when you change settings.
• Default Mode
• Operation Clear
• Sound Control
• Local Interface*
1
Attribute Name1 cn Specifies the attribute name searched for as
t
he user name. Used for searching
destinations for Scan To E-mail. Entry for
[Name1] is required. To add attributes to
search, enter [Name2] and [Name3].
Name2 sn
Name3 givenName
E-mail Address mail Specifies the attribute name searched for as
an e-mail address. Used for searching
destinations for Scan To E-mail.
Additional Filter (NULL) Specify searching scheme to be added when
searching. Used for searching destinations for
Scan To E-mail. (Ex:
employeeNumber>=1000)
Authentication Method Anonymous Sets the authentication method.
For Digest-MD5, the DNS server must be set.
For Secure Protocol, the SNTP server, DNS
server, and secure protocol server must be
set.
User ID (NULL) Sets a user ID for LDAP server authentication.
You can enter up to 80 characters.
This item is displayed when the LDAP
authentication method is not set to
[Anonymous].
Password (NULL) Sets a password for LDAP server
authentication. You can enter up to
32 characters.
This item is displayed when the LDAP
authentication method is not set to
[Anonymous].
Encryption None Sets the encryption of communication to the
LDAP server.
Item Factory default setting Description
Domain (NULL) Sets a realm name for the Kerberos
certification. Use upper-case letters for
alphabets.You can enter up to 64 characters.
Item Factory default setting Description
Manage Unit
Item Factory default setting Description
Default Mode Home Sets the default mode screen of this
machine.
Item Factory default setting Description
Operation Timeout 3 Sets time for automatic reset of screen to
begin.
Available range: 1 to 10 minutes
Clear After Job OFF Sets whether to reset after job is completed.
Item Factory default setting Description
Key Touch Tone Volume Middle Sets the volume of the key-touch tone.
Copy Buzzer Volume Middle Sets the volume for the copy complete
sound.
FAX Buzzer Volume Middle Sets the volume for the transmission
complete sound.
Paper Jam Error
Buzzer Volume
Volume Middle Sets the volume for the paper jam alert tone.
Type Type 1 Sets the type of paper jam alert sound.
AirPrint Buzzer Volume Low Sets the AirPrint confirmation operation
sound.
Item Factory default
setting
Description
USB Menu USB Enable Sets whether to enable USB.
Soft Reset Disable Sets whether to enable the soft reset
command.
Speed 480Mpbs Selects the maximum transfer speed of USB
interface.
Offline Receive Disable Set whether to receive data in offline state or
in recoverable error state.
Serial Number Enable Sets whether to use a USB serial number.
Connected Host Normal Sets a host to be connected.
To Next Page
Loading...
Need help?
General
