- 35 -
2. Copy
To adjust a level of the document background removal, you can select Auto or OFF, or adjust
in six levels.
If you select [Auto], the background is automatically removed in a level that suits the
document.
• If a greater value of the background removal is set, fine lines, texts or light colors may not be reproduced depending
on the document.
• In the following cases, background color may not be correctly detected and not be eliminated successfully.
- When a custom-size document is loaded
- When a document with the front edge folded is loaded
- When a document missing the front edge or an oblique document is loaded
- When a document having a hole near the front edge is loaded
- When a document is placed without aligning it with the guide on the document glass
1
Press the (COPY) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the button.
4
Press the or button to select [Image settings] and press the button.
5
Press the or button to select [Background Removal] and press the
button.
6
Press the or button to select the value you want to set and press the
(OK) button.
[3] for [Background removal] is the standard level. To increase a level of the document background removal,
select [4], [5], or [6]. To decrease a level of the document background removal, select [2], [1], or [OFF] (no
removal).
7
Press the (MONO) or (COLOR) button.
When you copy a document with the document glass cover opened or when you copy a
book, a black shadow may appear around the edges on the printed copy. This function
enables you to erase the black shadow.
1
Press the (COPY) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the button.
4
Press the or button to select [Edge Erase] and press the button.
5
Check that [ON] is selected, and then press the button.
6
Press the numeric keypad to enter a value from 2 to 50 mm in [Width] and
then press the (OK) button.
7
Press the (MONO) or (COLOR) button.
Copying a Document with a Colored Background Clearly
(Background Removal)
Erasing Edge Shadows (Edge Erase)
To Next Page
Loading...
Need help?
General
