- 271 -
9. Operating Management/ Specifications
T/F Timer Programming 35 seconds Sets when to start the auto fax reception if
the communication does not start even after
an incoming call arrives in Tel / Fax Ready
mode or Ans / Fax Ready mode.
Soft Ringer Volume High Sets a phone ring volume in Tel / Fax Ready
mode.
Remote Receive Number OFF Sets a remote switch over number.
Item Factory
default
setting
Description
FaxServer Function
Item Factory default setting Description
Environmental Settings FaxServer Function OFF Sets whether to use
scanning to fax server.
Prefix (NULL) Sets to prefix code for
scanning to fax server.
Suffix @faxserver Sets to suffix code for
scanning to fax server.
Text OFF Sets whether to add body
text.
Default Settings Scan Size A4 or Letter Sets the default scan size.
Density 0 Sets the default density.
Resolution Normal Sets the default resolution.
Background Removal Auto Sets the default setting of
the background removal.
Continuous Scan OFF Sets whether to use
Continuous Scan mode by
default.
Compression Rate Low Selects the default
compression level.
Security Function Broadcast Destination ON Sets whether to indicate the
transmission destination
number before starting
broadcast transmission.
Confirm Dial OFF Sets whether to reenter the
transmission destination fax
number before sending.
To Next Page
Loading...
Need help?
General
