100
EN
Shooting Settings
4
Enabling AF Target Selection Wrap (N Loop Settings)
PASMB
n
You can choose whether AF target selection “wraps around” the edges of the display.
You can also choose whether you have the option of selecting oAll (all targets)
before AF target selection “wraps around” to the opposite border of the display.
Menu
MENU n AF n5. AF Target Settings & Operations n N Loop
Settings
N Loop
Selection
[O]: Wrap disabled. Target selection stays within the borders of the
display.
[Loop 1]: If you continue to press the
multi selector in the same direction after
reaching the border of the display, the
target in the same row or column on the
opposite border will be selected.
“Loop 1”
[Loop 2]: If you continue to press the
multi selector in the same direction after
reaching the border of the display, the
target in the next row or column on the
opposite border will be selected.
“Loop 2”
Via oAll
[No]: Target selection does not pass through oAll (all targets) before
wrapping around.
[Yes]: If [Loop 1] or [Loop 2] is chosen for [N Loop Selection], target
selection will pass through oAll (all targets) before wrapping around
to the opposite border.
• Hiding oAll (all targets) in [KAF Target Mode Settings] xes [Via
oAll] at [No].
# [N Loop Settings] is xed at [O] during movie recording and when [FAF] or [FAFb]
is selected for focus mode.
To Next Page
Loading...
Need help?
General
