Olympus OM System OM-1 User Manual

76 EN
Shooting Settings
4
Choosing a Focus Target (AF Target Point)
PASMB
n
The frame showing the location of the focus point is referred to as the “AF target”. You
can position the target over your subject. At default settings, the multi selector is used
to position the AF target.
1
Use the multi selector to position the AF target.
Multi selector
• The AF target is displayed at the start of the operation.
• To select the center AF target, press the multi selector
or press and hold the Q button.
• You can choose whether AF target selection “wraps
around” the edges of the display (P. 100).
f
SmallSmall
AF target
2
Take pictures.
• The AF target selection display will clear from the monitor when the shutter button is
pressed halfway.
• The AF frame is displayed in place of the selected AF target.
%You can reposition the AF target during focusing when [C-AF] or [C-AFb] is selected in
still photography mode.
%You can also reposition the AF target during movie recording.
%The size and number of the AF target changes depending on shooting settings.
%When [On] is selected for [AF Targeting Pad] (P. 101), you can reposition the AF target
using monitor touch controls while framing your subject in the viewnder.

Olympus OM System OM-1 Specifications

General

Brand	Olympus
Model	OM System OM-1
Category	Digital Camera
Language	English