182
EN
Shooting Settings
4
HDMI Output (nHDMI Output)
PASMB
n
Adjust settings for output to HDMI devices. Options are available for controlling HDMI
recorders from the camera or adding time codes for use during movie editing.
Menu
MENU n
n
n5. Sound Recording/Connection n nHDMI Output
Output Mode
[Monitor]: The HDMI device functions as an external monitor. The
camera outputs both images and indicators to the display. Output
settings can be adjusted using the [HDMI Settings] option (P. 251).
[Record]: The HDMI device functions as an external recorder. Only
images are output to the device. Frame size and sound settings are
adjusted using camera controls.
[RAW]: Images are output to the HDMI device in RAW format.
Images are not recorded on the card in the camera. Frame size and
sound settings are adjusted using camera controls.
• The camera operates in [Monitor] when the mode dial is set to
P/A/S/M/
B
or when the menu is displayed, or when playing
back an image.
REC Bit
The camera and the external device start and stop recording at the
same time.
• This option is only available with compatible devices.
[O]: Does not use this function.
[On]: Controls the external device.
Time Code
Output time codes to the external device. Time code settings can be
adjusted using [Time Code Settings] (P. 181).
[O]: Does not output time codes to the external device.
[On]: Output time codes to the external device.
About [RAW]
When [RAW] is selected, the raw images, to which shooting settings such as exposure
compensation and white balance have not been applied, can be recorded.
Visit our website for information on HDMI devices compatible with [RAW].
• When [RAW] is selected, “HDMI” will appear on the camera monitor while outputting
signals to an HDMI device.
# The images output from the camera when [RAW] is selected are recorded in ProRes RAW
format.
# When [RAW] is selected and a compatible HDMI device is connected, [nPicture Mode]
will be set to [a2 OM-Log400].
# The following limitations apply when [RAW] is selected.
- [nK]: Only [C4K] and [4K] can be selected. Slow- or fast-motion movies are not
available.
- [nImage Stabilizer]: Only [M-IS O] and [M-IS2] can be selected.
- [nDigital Tele-converter] will be set to [O].
- [nAF Mode] when using a Four Thirds system lens: Only [MF] and [Preb] can be
selected.
To Next Page
Loading...
Need help?
General
