263
EN
Connecting the Camera to External Devices
8
Wireless Settings for When the Camera Is O (Power-o Standby)
You can choose whether the camera will maintain a wireless connection to the
smartphone when o.
Menu
MENU n e n 4. Wi-Fi/Bluetooth n d Settings n Power-o
Standby
Select When you turn the camera o, you will be prompted to choose
whether to maintain the wireless connection to the smartphone.
O Turning the camera o terminates the wireless connection to the
smartphone.
On When the camera is turned o, the connection to the smartphone
remains active and the smartphone can still be used to download or
view the pictures on the camera.
“Select”
When [Select] is chosen for [Power-o Standby], a
conrmation dialog will be displayed before the camera
turns o if all the following conditions are met:
• [O] is selected for [Airplane Mode]
• The camera is currently connected with a smartphone
(P. 261)
• The memory card is correctly inserted
OK
Power-off Standby
Yes
No
Activate Wi-Fi/Bluetooth Power-off
Standby so images can be imported
while power is off?
Yes
Turn the camera o but leave the wireless smartphone connection active.
No
Turn the camera o and terminate the wireless smartphone connection.
# If no operations are performed about a minute after the conrmation dialog is displayed,
the camera will end the wireless connection to the smartphone and turn o automatically.
# If left active, the wireless connection will automatically terminate if:
- the connection remains inactive for 12 hours
- the memory card is removed
- the battery is replaced
- a charging error occurs during on-board battery charging
The connection can be restored by turning the camera on.
%Note that if [On] is selected for [Power-o Standby], camera may not turn on immediately
when the ON/OFF lever is rotated to ON.
To Next Page
Loading...
Need help?
General
