298
EN
Information
10
Wireless remote control ash photography
PASMB
n
Wireless ash photography is available with compatible ash units that support
wireless remote control (RC). The remote ash units are controlled via a unit mounted
on the camera hot shoe. Settings can be adjusted separately for the units in up to three
other groups.
RC mode must be enabled on both the master and remote ash units (P. 297).
1
Set the remote ash units to RC mode and place them as desired.
• Turn the external ash units on, press the MODE button, and select RC mode.
• Select a channel and group for each external ash unit.
2
Select [On] for [# RC Mode] (P. 124).
• The camera will exit to the shooting display.
• “RC” will be displayed.
RCRC
1
1
/
1
/
F
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF
60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
1
##
F
00
+
-
100
%
100
%
rr
OO
ISO
Auto
ISO
Auto
RC
3
Press the Q button.
• The RC mode super control panel will be displayed.
• The standard LV super control panel can be displayed
by pressing the INFO button. The display will change
each time the INFO button is pressed.
±
0.0
±
0.0
A Mode
RCRC
0.0
5.6250P
Ch1Low
TTL
Off
Off
A
Small
1/ Auto
ISO
#
#
x
G
3
0
+
-
C
B
[
1:02:03
]
1023
r
±
F
200
WB Auto
RC mode super control panel
To Next Page
Loading...
Need help?
General
