5.23
BODY / STEERING / SUSPENSION
5
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
Rear Fender Flair / Box Side Removal
1. Remove the (9) T27 Torx screws. Remove the fender
flair / box side from the vehicle.
Cargo Box Assembly Removal
1. Remove the driver and passenger seats.
2. Remove cargo box panel and engine service panel.
3. Remove the (4) Torx screws (A) retaining the front of
the cargo box to the vehicle frame.
4. Remove the (6) Torx screws (B) from both the RH and
LH side of the vehicle.
5. Remove the (2) Torx screws (C) from both the RH and
LH side of the vehicle.
6. Remove the (6) Torx screws (D) from the rear cargo
box area.
7. Remove the (4) Torx screws (E) that attach the rear
bumper to the vehicle frame.
8. Loosen the hose clamp (F) and disconnect the engine
intake hose from the resonator baffle box.
9. Remove the (2) Torx screws (G) from each side of the
vehicle securing the LH resonator box support bracket
and the RH clutch intake box support bracket.
10. Loosen the hose clamp (H) and remove the clutch
intake hose from the inner clutch cover.
Fender Flair /
Box Side
Torx
Screws
Torx
Screws
To Next Page
Loading...
Need help?
General
