EasyManuals Logo
Home>Polaris>Utility Vehicle>xp 2013 eps

Polaris xp 2013 eps User Manual

Polaris xp 2013 eps
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
3.27
ENGINE / COOLING
3
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
NOTE: Have an assistant help guide the engine in
and out of the vehicle while using an engine hoist to
prevent personal injury or damage to vehicle
components.
29. Remove the starter motor bolts and starter motor from
the engine.
30. Remove the (6) transmission joint bracket bolts and
transmission joint bracket from the engine.
31. Install the engine stand adapter (PU-50562) onto the
engine where the starter motor was located.
32. Select the proper engine stand sleeve adapter and
install it onto the engine stand adapter.
Sleeve adapter for a 2” bore engine stand:
(PU-50625)
Sleeve adapter for a 2.375” bore engine stand:
(PW-47054)
33. Place engine onto the engine stand (PU- 50624) for
service.
Engine Installation
Use the following procedure to reinstall the engine
assembly.
1. Attach engine with suitable lifting straps to an
overhead or portable engine hoist.
2. Remove the engine stand adapter plate and install the
starter motor back onto engine. Torque starter motor
bolts to specification.
3. Install transmission joint bracket onto engine and
torque fasteners to specification in sequence.
PU-50625
or
PW-47054
PU-50562
PU-50624
= T
Starter Motor Bolts: 7 ft-lbs (10 Nm)
Trans Joint Bracket Bolts: 44 ft-lbs (60 Nm)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris xp 2013 eps and is the answer not in the manual?

Polaris xp 2013 eps Specifications

General IconGeneral
BrandPolaris
Modelxp 2013 eps
CategoryUtility Vehicle
LanguageEnglish

Related product manuals