6.7
CLUTCHING (PVT)
6
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
13. Loosen the hose clamp attaching PVT inlet duct to the
inner clutch cover. Disengage the hose from the inner
clutch cover.
14. Loosen hose clamps that attach clutch outlet duct to
inner clutch cover. Disengage hose from the cover.
15. Remove the (7) bolts that retain inner clutch cover to
engine and transmission. Remove inner clutch cover.
PVT Assembly
1. Inspect inner clutch cover. Replace if cracked or
damaged.
2. Inspect the seal on the transmission input shaft.
Replace if damaged.
3. Inspect inner clutch cover seal (engine side). Replace
if cracked, torn or damaged.
4. Install and properly align the inner clutch cover. Be
sure the fuel line, vent line and battery cables are
properly routed through the guard plate as shown.
Divider
Hose / Battery Cables / Throttle Cable
Fuel Lines on Inside
To Next Page
Loading...
Need help?
General
