6.6
CLUTCHING (PVT)
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
7. Remove the (8) clutch cover screws and remove the
outer clutch cover from the vehicle.
8. Mark the drive belt direction of rotation and remove
drive belt (see “DRIVE BELT - Belt Removal”).
9. Remove the driven clutch retaining bolt and driven
clutch.
10. Install the Drive Clutch Holding Tool (9314177-A) on
the drive clutch.
11. Remove the drive clutch retaining bolt and remove the
drive clutch using Drive Clutch Puller 2872085.
IMPORTANT: Be sure to use the correct Drive Clutch
Puller (PN 2872085) to prevent damage to crankshaft.
12. Remove the (4) push rivets that secure the upper
guard plate to the top of the inner PVT cover. Make
note of the routing of the fuel lines, vent line, battery
cable and wire harness for proper assembly.
Drive Clutch Holding Tool 9314177-A
Drive Clutch Puller 2872085
To Next Page
Loading...
Need help?
General
