2.41
MAINTENANCE
2
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
Shock Compression Adjustment
The compression damping adjustment is located on top of
the shock ‘Piggyback’ reservoir of each shock.
Turn the clicker adjuster knob to make damping
adjustments.
NOTE: When clicker adjuster is turned clockwise
until it stops, damping is in the fully closed position.
Turn the clicker clockwise to increase compression
damping. Turn the clicker counter-clockwise to decrease
compression damping.
NOTE: The factory setting is 10 clicks from closed.
Refer to the “Compression Adjustment Table”.
Compression Adjustment Table
Setting Compression Damping
Softest Full counter-clockwise position
Factory 10 clicks from closed
Firmest 2 clicks from closed
Clicker
Adjuster
Increase
Damping
Decrease
Damping
To Next Page
Loading...
Need help?
General
