Polaris xp 2013 eps User Manual

9.32
BRAKES
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
Caliper Installation
1. Install the rear caliper with new mounting bolts.
Torque mounting bolts to specification.
2. Install brake line banjo bolt and torque to specification.
3. Install lower radius rod bolt, washer and new nut.
Torque to specification.
4. Install the pad adjustment screw and turn until
stationary pad contacts disc, then back off 1/2 turn.
5. Follow bleeding procedure outlined earlier in this
chapter.
6. Install wheel and torque wheel nuts to specification.
NOTE: If new pads are installed, refer to “REAR
BRAKE PADS - Brake Burnishing Procedure”.
= T
Rear Caliper Mount Bolt:
40 ft-lbs (54 Nm)
40 ft-lbs
(54 Nm)
= T
Radius Rod to Bearing Carrier Bolt:
45 ft-lbs (61 Nm)
= T
Wheel Nuts:
30 ft-lbs (41 Nm) + 90° (1/4 turn)

Polaris xp 2013 eps Specifications

General

Brand	Polaris
Model	xp 2013 eps
Category	Utility Vehicle
Language	English