8.16
TRANSMISSION
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
31. Lightly tap on the bearing from the opposite side to
remove it from the snorkel tube.
32. Remove the retaining ring to remove the remaining
washer, bearing and gear from the snorkel shaft.
Gear / Shaft / Bearing Inspection
Inspect all gear sets and shafts for
excessive wear or damage.
IMPORTANT: If gear replacement is
required, be sure to also replace the
corresponding gear or gear shaft.
Inspect all bearings for signs of
wear or damage. If replacement is
required, use a standard bearing
puller or an arbor press.
To Next Page
Loading...
Need help?
General
