Polaris xp 2013 eps User Manual

5.51
BODY / STEERING / SUSPENSION
5
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
FOX™ Shock Rebuild Information
When performing maintenance on FOX™ shocks, use the
Gas Shock Recharging Kit (PN 2200421), as it contains
the necessary valves, pressure gauge, and fittings to
deflate and pressurize shocks.
TIP: Extreme cleanliness is very important during all
disassembly and reassembly operations. This prevents
dirt or foreign particles from entering the shock, which
causes premature failure.
Special Tools
SPX Corp: 1-800-328-6657 or http://polaris.spx.com/
FOX™ Shock Disassembly
IMPORTANT: To prevent damage or marks to the
shock, the use of special tools and a soft jaw vise is
recommended.
1. Remove the shock from the vehicle and note the
spring preload distance (see Chapter 2 for factory
settings).
2. Thoroughly clean all shock components and shock
body prior to disassembly.
3. Back preload adjuster all the way down and carefully
remove spring retainer and spring.
4. Use the appropriate shock body holding tool (PS-
45281-A) to properly secure the shock body assembly
into a vice for service.
5. Remove the nylon ball from the reservoir cap using a
heavy duty pick. Discard nylon ball and replace with
new upon assembly.
6. Slowly loosen nylon ball retainer from reservoir cap
and allow nitrogen to completely escape.
7. Remove the nylon ball retainer.
WARNING
FOX™ shocks contain high pressure nitrogen
gas. Extreme caution must be used while
handling and working with FOX™ shocks and
related high pressure service equipment. The
pressure must be released from the shock
before disassembly. It is strongly recommended
you wear safety glasses and ear protection
during these procedures.
PART NUMBER DESCRIPTION
2200421 Gas Shock Recharging Kit
7052069-A Gas Shock Recharging Needle
2871351 IFP Tool
PS-45281-A
Shock Body Holding Tool
(Front and Rear)
2872429 Shock Rod Holding Tool
PU-50939 Shock Seal Protector Sleeve
WARNING
FOX™ shocks contain high pressure nitrogen
gas. Extreme caution must be used while
handling and working with FOX™ shocks and
related high pressure service equipment. The
pressure must be released from the shock
before disassembly. It is strongly recommended
you wear safety glasses and ear protection
during these procedures.

Polaris xp 2013 eps Specifications

General

Brand	Polaris
Model	xp 2013 eps
Category	Utility Vehicle
Language	English