8.8
TRANSMISSION
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
TRANSMISSION INSTALLATION
1. With the help of an assistant, position the
transmission into the vehicle frame through the left
rear wheel well area.
2. Slide transmission towards rear of the vehicle and
rotate the top of the transmission toward the right side
of the vehicle.
3. Install the rear transmission mount assemblies.
Torque all fasteners to specification.
4. Install the (2) rear exhaust springs securing the
muffler to the rear transmission mounting bracket.
5. Install the Clutch Center Distance Tool (PU-50658)
onto the crankshaft and transmission input shaft to
properly position the clutch center distance. The
pictures below show the tool (PU-50658) properly
installed.
6. Loosen the (2) bolts retaining the transmission
coupler bracket to the engine on the right side.
7. Align front transmission mounting holes with
transmission joint bracket mounting holes on engine.
Rear Transmission Mount Bracket Bolts:
17 ft-lbs (23 Nm)
Rear Mount Bracket to Transmission Bolts:
15-20 ft-lbs (20-27 Nm)
17 ft-lbs
(23 Nm)
15-20 ft-lbs
(20-27 Nm)
17 ft-lbs
(23 Nm)
Drive Clutch Bolt Installed
To Next Page
Loading...
Need help?
General
