10.6
ELECTRICAL
9924096 - 2013 RANGER RZR XP 900 / RZR XP 4 900 Service Manual
© Copyright 2012 Polaris Sales Inc.
Trip Meter
The trip meter records the miles traveled by the vehicle on
each trip. To reset the trip meter:
1. Toggle the MODE button to TRIP 1.
2. To reset to 0, push and hold the MODE button until
the distance display changes to 0.
Tachometer (RPM)
Engine RPM can be displayed digitally.
Engine Temperature
Engine temperature can be displayed in ° F or ° C. Refer
to “Units of Measurement” to change the format.
Engine Hours
Engine hours are logged anytime the engine is running.
Total hours can not be reset.
Programmed Service Interval
The initial factory service interval setting is 50 hours. Each
time the engine is started, the engine hours are subtracted
from the service interval hours. When the service interval
reaches 0, the LCD wrench icon will flash for
approximately 10 seconds each time the engine is started.
To change the hour setting or reset the function, follow
these steps:
1. Toggle the MODE button until the wrench icon is
displayed in the information area.
2. Press and hold the MODE button until the information
display area begins to flash.
3. Toggle the MODE button to increase the service
interval hours in 5 hour increments to a maximum of
100 hours.
4. To turn off the service interval function, toggle the
MODE button until “OFF” is displayed.
To Next Page
Loading...
Need help?
General
