Disconnecting Power and LAN2.4
1.
Press (at the top right corner of the control panel).
- A short press on the sleep/on/soft off mode button sets the machine to
'sleep' mode.
- A long press on the sleep/on/soft off mode button sets the machine to 'soft
off'.
The light located next to the key indicates:
- Green: The mailing system is in 'awake' mode and ready for use.
- Amber (continuous): The mailing system is in sleep mode (low power mode).
- Amber (blinking): The mailing system is in soft off mode (very low power
mode).
2.
Ensure that the light located next to the key is amber, meaning that the mailing
system is in 'sleep' mode.
3. Turn off your mailing system. The circle (or O) indicates that the system is off.
4. Unplug the power cord from the wall outlet.
5. Unplug the LAN cable from the socket, as it may still be energised.
11
| Page 11 | | Jan-15-2024 09:55 |
2
Safety Information