quadient iX-9 Series User Manual

Inserter Mode11.12
You can connect an inserter to your Mailing System. If you have the electronic connection
option, the inserter drives the Mailing System automatically. This electronic connection
uses an RS232 cable between the inserter and the base of the Mailing System.
If the Mailing System and the inserter are not electronically connected, you need to
activate the “Inserter Mode ON” to use the Mailing System with the inserter.
As Supervisor, you can set the “Inserter Mode ON” as the default mode.
You can connect Base only to an Inserter and use Inserter
authorisation feature for printing. See also Inserter Mode on
page 357.
Using Electronic Connection
This electronic connection uses an RS232 cable between the inserter and the base of
the Mailing System.
In this type of connection, the inserter drives automatically the Mailing System so that
mail processing can be initiated by the Inserter and can be run on both the Inserter
and the Mailing System as a system.
When your system is only Base electronically connected to an
Inserter. You need to have a feature called Inserter Authorisation
to enable printing.
For more information about the feature, please contact Customer
Service.
357
| Page 357 | | Jan-15-2024 09:55 |
11
Configuring your Mailing System

quadient iX-9 Series Specifications

General

Brand	quadient
Model	iX-9 Series
Category	Postal Equipment
Language	English