How to Add PPI's
To add a PPI:
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Options and Updates Update PPI
The list of PPI's is displayed in the PPI Management screen.
2. Select Add new and connect the memory device to a USB port of the machine (on
your left-hand side at the rear of the base. (See Base connectors on page 48).
3. Press [OK]. The USB memory device content is displayed.
4. Select a PPI to load into the machine and press [OK].
The PPI list is updated with the new PPI.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
394
| Page 394 | Jan-15-2024 09:55 |
12
Options and Updates
To Next Page
Loading...
Need help?
General
