Quantum Scalar i6000 User Manual

Chapter 3: Configuring Your Library
Configuring Drive Cleaning
228 Quantum Scalar i6000 User’s Guide
Note: For information about cleaning media, see Using Cleaning
Cartridges on page 696.
Assigning Cleaning
Magazines
To configure the library for drive cleaning, you must first assign one or
more magazines as cleaning magazines, and then import cleaning
media (see
Importing Cleaning Media on page 230).
Note: At least one magazine must be assigned for cleaning before
you can import cleaning media. Also, only magazines that do
not belong to a partition can be assigned for cleaning.
1 Make sure that you are viewing the physical library. From the View
menu, select the name of the physical library.
2 On the menu bar, select Setup > Cleaning Slots. The Cleaning Slot
Configuration window displays.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing