Quantum Scalar i6000 User Manual

Chapter 4: Active Vault
Configure Active Vault
Quantum Scalar i6000 User’s Guide 261
managed Active Vault partitions. Configuring Active Vault involves the
following:
• Create Active Vault Partitions on page 261
• Configure Access to External Applications on page 262 (optional)
• Configure Active Vault Policies on Partitions on page 262
• View Active Vault Partition Policies on page 266
Note: Manual movement between library managed partitions and
standard partitions will require inventory reconciliation with
the backup application managing the standard partition. SCSI
Unit Authentication G/2800 and G/2801 is for host applications
with the need to refresh element status.
Create Active Vault
Partitions
Create one or more Active Vault partitions as follows:
1 Make sure you are viewing the physical library. From the View
menu, select the name of the physical library.
2 Make sure the Active Vault license is installed on the library (see
Enabling Licenses on page 125).
3 Use Expert Mode to create one or more library managed Active
Vault partitions. Follow the instructions in
Using Expert Mode on
page 141. When you get to the screen named Partitions - Step 2:
Choose Partition Properties, select Library Managed (Vault) from
the Partition Type drop-down menu.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing