Quantum Scalar i6000 User Manual

Chapter 10: Path Failover
Configuring Host Access to Storage Networking Drives and Partitions
396 Quantum Scalar i6000 User’s Guide
4 Select Host Configuration and click Next to display the Select
Hosts Configuration Options screen.
5 Select Delete Host.
6 Click the appropriate box in the Select column to select the host to
delete.
7 Click Finish to delete the host. A warning message appears letting
you know that deleting the host will remove all host mappings
configured for the host.
8 Click Yes to continue.
9 Click OK in the The Host was deleted successfully dialog box.
10 If necessary, click Cancel then Yes to exit the dialog box.
Creating, Modifying,
and Deleting Host
Access Groups
If necessary, you can make the following modifications to host access
groups:
• Creating Host Access Groups on page 397
• Changing an Access Group Name on page 403

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing