Quantum Scalar i6000 User Manual

Chapter 13: Running Your Library
Understanding Location Coordinates
468 Quantum Scalar i6000 User’s Guide
Figure 56 Drive Location
Coordinate Numbering and
Example in Module 1, Rack 1
I/O Blade Locations I/O blades are located in the I/O management unit. The LMC displays I/O
blade locations in parenthetical format. The location coordinates are
aisle, module, rack, cluster, and bay, defined as follows:
• Aisle, Module, and Rack — The definitions the same as for other
library components (see
Cartridge Locations on page 460).
• Cluster — Refers to the I/O management unit and is always 1.
rack 1 (back)
module 1
column 1
section 1
section 6
section 7
section 12
drive 9 (1,1,1,9,1,1)
upper
drive
cluster
lower
drive
cluster

Quantum Scalar i6000 Specifications

General

Brand	Quantum
Model	Scalar i6000
Category	Storage
Language	English