Quantum Scalar i6000 User Manual

Chapter 10: Path Failover
Configure Control Path
364 Quantum Scalar i6000 User’s Guide
4 From the Control Path (CP) Type drop-down list, select Multi
Control Path (HP/IBM).
5 Select the drives you want to be control paths in the CP column. You
can select all drives listed as long as they have an SNW license.
Note: If you select the checkbox in the CPF column you will
receive an error. Failover is not available for the Multi
Control Path option.
6 Click Finish. An Operation in Progress dialog box appears.
Basic Control Path
Failover
Requirements
To configure drives for basic control path failover, you need the
following:
• A path failover license must be installed on the library (see Enabling
Licenses on page 125).

Quantum Scalar i6000 Specifications

General

Brand	Quantum
Model	Scalar i6000
Category	Storage
Language	English