Chapter 13: Running Your Library
Changing the Library’s State
Quantum Scalar i6000 User’s Guide 475
Note: You do not need to change the current library view to
change the online or offline state of the physical library or
a partition.
For more information about using this dialog box to change online or
offline mode, see
Changing the Library’s State on page 475.
Changing the Library’s State
You can take the physical library or any of its partitions online or offline.
Some library functions require that the physical library or partitions be
in an online or offline state. You also can shut down the physical library
from the library’s touch screen.
Shutting down the library only prepares it to be powered off. You will
use the shutdown procedure in some circumstances to prepare the
library for remove and replace procedures. For more information about
shutting down the library, see
Shutting Down/Rebooting the Library on
page 485.
Taking the Physical Library or a Partition Online or Offline
To take the physical library online or offline, change its mode.
1 Make sure that you are viewing the physical library or the partition
that you want to take online or offline. From the View menu, click
the name of the physical library or the appropriate partition.
2 Click Operations > Change Mode. The Change Library Mode
dialog box appears with the current state of the physical library or
partition shown.
To Next Page
Loading...
Need help?
General