Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Monitoring the Library
540 Quantum Scalar i6000 User’s Guide
Displaying Humidity Information
Gen 2 libraries display humidity information. A humidity sensor is
attached to each robot.
1 To display humidity status information for various library
components, click the Humidity tab on the Sensor Status dialog
box.
Tab l e 47 on page 540 describes the elements on the Humidity tab.
Table 47 Humidity tab
2 To view current information, click Refresh.
Monitoring Users
Status
The Users Status dialog box displays detailed information about users
who are currently logged on to the library. You can perform this
procedure while viewing either the physical library or a partition.
1 Click Monitor > Users. The Users Status dialog box appears.
Element Description
Robot Which robot (left or right) the humidity sensor is attached to. If the library
has only one robot, this column displays “Left.”
Status Robot’s online or offline status.
Humidity The humidity of the interior of the library at the location of the sensor.

Quantum Scalar i6000 Specifications

General

Brand	Quantum
Model	Scalar i6000
Category	Storage
Language	English