Quantum Scalar i6000 User Manual

Chapter 4: Active Vault
Configure Active Vault
262 Quantum Scalar i6000 User’s Guide
Configure Access to
External Applications
This is optional. You only need to do it if you want to use the library to
determine if the external application has a vault name that matches the
name of an active vault partition in the library.
If you want to use an external application to direct media to Active Vault
partitions you first need to configure the library for external application
access. Follow the steps in
Chapter 11, Configuring Access to StorNext,
and then return here. You will then be able to select external application
policies in the next step.
Configure Active Vault
Policies on Partitions
You can only configure an Active Vault Policy on standard partitions (not
library managed partitions). This policy redirects SCSI host initiated tape
cartridge export MOVE operations to an Active Vault.
1 Click Setup > Partitions > Policies > Active Vault Configuration.
The Active Vault Configuration Wizard appears.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing