Quantum Scalar i6000 User Manual

Chapter 9: Extended Data Lifecycle Management
Running Manual EDLM Tests
Quantum Scalar i6000 User’s Guide 343
• The EDLM library managed partition must be configured on the
library (see
Step 1: Creating the EDLM Library Managed Partition on
page 330).
• The cartridge you want to scan must be capable of being read by a
tape drive in the EDLM library managed partition.
• The cartridge can be located in any partition, including the EDLM
library managed partition.
• The cartridge must be located in a storage slot, not in a drive or I/E
station.
To run a manual EDLM test, do the following:
1 Log on as an administrator.
2 From the View menu, select the physical library or a partition on
which EDLM policies are enabled.
3 From the main menu, select Tools > EDLM > Test Selection. The
EDLM Test screen appears.

Quantum Scalar i6000 Specifications

General

Brand	Quantum
Model	Scalar i6000
Category	Storage
Language	English