Chapter 13: Running Your Library
Library Management Console (LMC)
458 Quantum Scalar i6000 User’s Guide
Each button displays a status indicator that reveals a Good, Warning,
Degraded, or Failed state as follows:
For example, the buttons shown in Figure 48 on page 457 indicate that
all subsystems are functioning normally (Good), while those shown in
Figure 49 indicate that issues exist in the Media subsystem.
Robotics Assemblies and processors involved in the movement and handling of library
media, such as the IEX board, I/E stations, the pivot and reach assemblies,
system barcode labels, doors, filters, the accessor, drive mounts, rails, towers,
and carriages
Connectivity Host connectivity components, such as I/O management units, I/O blades, and
the chassis management blade (CMB)
Power Power supplies and related hardware, such as the power distribution unit (PDU),
power chassis, and fuses
Control Main processor cards and related hardware and software, such as system
firmware, the management control blade (MCB), the robotics control unit (RCU),
the library motor drive (LMD), and the operator panel
Media Media components such as cartridges and magazines
Subsystem Components
Good (green) The library system is in working
order; no problems or issues exist.
Warning
or
Degraded (yellow)
There is a degraded or failed
component within this category that
requires action, but the overall
category still is functioning.
Failed (flashing red) A component in this category has
failed.
To Next Page
Loading...
Need help?
General