Quantum Scalar i6000 User Manual

Chapter 15: Maintaining Your Library
Using Sift Sort
Quantum Scalar i6000 User’s Guide 679
You may choose to filter by partition or by barcode.
3 To filter by partition, in the SSE Source Filter area, do the following:
a Select a Partition from the drop down list.
b If EDLM is licensed on the library, you can filter media in the
EDLM library managed partition and partitions with EDLM
policies configured according to their media scan test result.
Sort by
EDLM
scan test
result

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing