Quantum Scalar i6000 User Manual

Appendix A: Frequently Asked Questions
Quantum Scalar i6000 User’s Guide 683
The library should recover even if power goes out completely during a
backup. If power remains off, press the Power button and leave it in the
off position until you can obtain a reliable power source. When the
power to the library is turned back on, the library will recover. You must
re-run the backup using your application software.
If the library does not automatically come back up after a power
outage, cycle library power. Cycling library power involves shutting
down the library, powering it off, and then powering it on. For more
information, see
Shutting Down/Rebooting the Library on page 485,
Powering Off the Library on page 487, and Powering On the Library on
page 487. The blue LED on the power supply will be on and not
blinking.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing